PRODUCT INFORMATION
Aggressively cut yet clean in execution, the Iridium H2O is in a league of its own. If we were to categorize it – although it’s hard - we’d put it in what we call the “Urban Techwear.” Inspired by both outdoor gear and fashion, it’s a modern interpretation of a traditional padded motorcycle jacket. The welded, seamless padded construction enables this jacket to be fully waterproof, hence the H2O designation. And while we’re talking about keeping the rain out, it comes equipped with a front waterproof zipper and is constructed with a fixed hydratex|Mesh G-liner construction.
To keep you warm on those cold and rainy days, we’ve included a detachable thermal liner that can easily be removed when it’s not needed. On warm days, partial perforation on this mesh motorcycle jacket will direct airflow straight to the body. Getting back to its looks, the Iridium H2O’s dark theme is complemented by texture contrasts, which add even more dimension to it. So does its detachable hood, which harnesses the casual fashion/streetwear component.
Those looking for a tech-focused, relaxed-fit urban textile jacket with ties to the outdoor realm needn’t look anywhere else. Sinister undertones included.
COMFORT FEATURES
Adjustability
Adjustment drawcord at hem
Adjustment tab at cuffs
Pockets
Inner pocket within thermal liner
The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
Two inner pockets
Two slit pockets on front
Features
Adjustment drawcord at hood
Detachable hood
The zip-on hood can be easily removed from the coat.
Drain eyelets at hood
Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Short connection zipper
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
V-flap at cuff
CLIMATE REGULATION
Waterproofing
hydratex®|Mesh G-liner
Insulation
Detachable thermal liner
Wind & water catcher behind front zipper
Ventilation
Air outlet on upper back
Zippers on lower arms
PROTECTION IN THIS PRODUCT
Protection
Prepared for SEESOFT™ CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT
™ CE-level 1 - an easy upgrade to maximize safety.
Prepared for SEESOFT™ CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT
™ CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART™ CE-level 1 Elbow Protectors
SEESMART™ CE-level 1 Shoulder Protectors
TPU protection at shoulder
Outer shell material
Padded fabric
The padded fabric adds extra comfort to the wearer.
Polyester 600D
This fabric made of polyester yarn makes a perfect, form-fitting medium for areas at lower risk of impact, keeping riders comfortable.
Ripstop softshell 3L
Ripstop fabrics are woven fabrics, often made of nylon, using a special reinforcing technique that makes them resistant to tearing and ripping. During weaving, (thick) reinforcement yarns are interwoven at regular intervals in a crosshatch pattern. Our ripstop softshell 3L is not only comfortable to wear but resistant to cuts and tears.
Softshell 3L
Visibility
Laminated reflection at chest
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection on hood
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection at upper arms
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflective logo on back
This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.
Laminated reflective logo on chest
CERTIFICATION
This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved A rating. For more details about certification
click here.
90% Poliester, 6% Poliamide, 4% Poliuretan